Réalisations électroniques, fabrication circuit imprimé, PCB, vérification automatique fichier gerber, devis immédiat en ligne

Stencils

We are also able to supply stencils for any printed circuit boards with SMD components.

The different stencil thicknesses we can offer, with or without borders, are below.

Please do not hesitate to contact us if a particular stencil is required.

• Stencil thickness: 80µm, 100µm, 120µm, 150µm, 180µm.
• Material used: stainless steel (SUS304)
• Treatment: electropolishing
• Precision: 5µm
• Size: dependent on a customer’s solder paste file.
• Production time: 24 to 48 hours.

We manufacture stencils according to customer requirements.
Usually, if a circuit has SMD components on 2 sides, there are 2 solder paste files, i.e. one for the top and one for the bottom and the customer will produce them on one stencil.
Regarding stencil thicknesses, we mainly take into consideration the spacing between the pads. For example, for spacing of less than 500µm between 2 integrated circuit pads, we would use a thinner stencil such as 100µm or 80µm. Most of our stencils use a standard thickness of 120µm.